Železiarne Podbrezová a.s.
|

Ask for quote

|

+421 48 6451111

Tubes suitable for welding and threading


Seamless steel tubes for threading and welding are produced by hot rolling. Continuously cast blooms are semi-finished product that is used as the starting material for these tubes. Threaded tubes have a wide range of use especially in the construction field. They are used for water transfer and distribution of all kinds of liquids and gasses.

The limits for using this group of tubes as far as the level of pressure is concerned and the type of transfer media is used are given by the appropriate directives that are valid for pipeline construction, distribution and pipes. Tubes are made from carbon and alloyed steel.

Ask for quote
Tubes suitable for welding and threading

Tube dimensions for threading and welding

OUTER DIAMETER (OD)26,9 – 114,3 mm
WALL THICKNESS (WT)Light serie (L2, L1, L), Medium serie (M), Heavy serie (H)
EUROPEAN STANDARDSEN 10255, EN 10224
AMERICAN STANDARDSASTM, ASME A/SA 53
Dimensional standard SIZES (OD x WT) Dimensional table
EN10224 (10220)10.2 x 0.5 – 139.7 x 16.0 mm
EN102559.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
BS13879.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
DIN24409.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
DIN24419.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
DIN24429.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
DIN24609.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
GOST32629.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
STN42 57109.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
ČSN42 57119.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
NF A49-1159.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
UNI63639.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
PN – H742209.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
UNI88639.8 x 2.0 – 113.1 x 5.40 mm [1/8 – 4 NPS] [6 – 100 DN]
ASTMA5310.3 x 1.24 – 114.3 x 13.49 mm [0.405 x 0.049 – 4.500 x 0.531 in] [1/8 – 4 NPS]
ASTMA79510.3 x 1.24 – 114.3 x 13.49 mm [0.405 x 0.049 – 4.500 x 0.531 in] [1/8 – 4 NPS]
ASMESA5310.3 x 1.24 – 114.3 x 13.49 mm [0.405 x 0.049 – 4.500 x 0.531 in] [1/8 – 4 NPS]

The types of steel destined for threaded tubes

EN 10224
EN 10255		L235, L275, L355
L195T, S195T
STN 42 025011 353
ASTM A 53
ASTM A 795		Grade A, Grade B.

Standard TDC Steel grade (open product) Dimensional standard
PN – H74220 / 8402374220
ČSN42 025042 5711
DIN16292460
EN1025510255
DIN24412441
PN – H74220 / 8402374220
STN42 025042 5710
DIN24402440
GOST3262 / 10503262
EN1025510255
STN42 025042 5711
NF A49-11549-115
BS13871387
ČSN42 025042 5710
UNI63636363
DIN16292460
UNI63636363
DIN16292442
UNI63636363
UNI88638863
ASMESA53/SA530SA53
ASTMA53/A530A53
ASTMA795A795
ASTMA53/A530A53
ASTMA795A795
ASMESA53/SA530SA53
EN1022410224 (10220)
EN1022410224 (10220)
EN1022410224 (10220)

Lengths of tubes

Types of supplied length of tubes are:
(a) random
(b) fixed
(c) exact:
L = 2–6 m 0 +10 mm
L = 6–12 m 0 +15 mm
L > 12 m 0 + upon agreement

Testing of the tubes for threading

Tubes are tested with nonspecified test.

Tests:
(a) leak tightness (pressure 50 bar for 5 seconds or according to EN 10246–1),
(b) visual inspection,
(c) tensile test,
(d) bend test,
(e) flattening test.

Tubes surface protection

The pipes are supplied without temporary anticorrosion protection.

While ordering, it is necessary to agree upon the method and means of temporarily protecting the surface of the tubes during transportation and storage.

Ends of tubes

The tubes with deburred ends or ends customized for welding.
The tubes with deburred ends or ends customized for welding.
The ends are vertical to the longitudinal axis and are without burrs.
The ends are vertical to the longitudinal axis and are without burrs.

Deburring applies to:

Deburring
  • Tube OD: 19,0 – 90,0 mm,
  • Tube WT: 2,0 – 10,0 mm,
  • Tube lengths: 3 – 7 m,
  • Deburring angle, α (alpha): 30°+5°, 37,5°±2,5°, 45°±2,5°
  • Dimension, c: 1,6 ± 0,8 mm
Ask for quote

Tubes packaging

(a) tubes bound with a steel band,
(b) tubes wrapped in plastic sheets, burlap,
(c) tubes in wooden crates.

Tubes are bound with steel band into bundles with weight 1 000–3 500 kg.

Packaking-STANDARD-tubes bound with a steel band
Packaking-STANDARD-tubes bound with a steel band
Packaking-STANDARD-bundle tied down by steel strap underlaid by paper
Packaking-STANDARD-bundle tied down by steel strap underlaid by paper
Packaking-STANDARD-PLUS-paper tape and polyethylene foil
Packaking-STANDARD-PLUS-paper tape and polyethylene foil
Packaking-STANDARD-PLUS-the bundle placed into a wooden box
Packaking-STANDARD-PLUS-the bundle placed into a wooden box
Packaking-PREMIUM-B-into a wooden box in which the tubes are wrapped in foil
Packaking-PREMIUM-B-into a wooden box in which the tubes are wrapped in foil
Packaking-PREMIUM-C-the bandles are wraped into and plastic foil
Packaking-PREMIUM-C-the bandles are wraped into and plastic foil
Packaking-PREMIUM-D-placing the whole shipment into foil+vacuum sealed
Packaking-PREMIUM-D-placing the whole shipment into foil+vacuum sealed

Tubes and bundle marking

Tubes are marked by the manufacturers’ logo and a symbol of series, or color marked:
medium series – blue
heavy series – red

Bundles are marked with metal tag with required information

Marked by a label
Marked by a label
Marked with spray either by a white or black color using InkJet
Marked with spray either by a white or black color using InkJet
Marked by stamping the data
Marked by stamping the data
Laser marking
Laser marking

Certified test reports

EN 102042.1, 2.2
DIN 50049,
STN/ČSN 42 0250
2.1, 2.2


Straightness


Tubes are visually straight.
Max deviation 0.2 % of tube length.


Delivery condition and tubes surface


Usually the tubes are supplied as hot rolled. Only tubes with DN 6 -10, or possibly tubes of other dimensions may be supplied after an agreement as cold drawn tubes, and after forming, heat treated.

Surface of the tubes is appropriate to the way of production. Upon request, tube surface may be taken care of by a definite surface insulation (tar, PVC tape or extruded PVC according to DIN 30670).



Contact us

Are you interested in cooperation? Send us an inquiry, or order the goods directly from stock.
+421 48 6451111 | admin@zelpo.sk

Download the Product portfolio of steel tubes

Send us your INQUIRY

 Your ASK FOR QUOTE form