Seamless steel tubes for pressure equipment, used at an ambient temperature
Specifications and steel grades,
Tube sizes acc. to EN, DIN, BS, NF A, UNI, STN, ČSN, and PN-H standards,
Tube sizes acc. to GOST and TU standards,
Tube sizes acc. to ASME standards,
Tube sizes acc. to ASTM standards,
Tube sizes acc. to JIS standars,
Precision tubes sizes.
Tubes for pressure use can be found in many areas of industry. The possibilities of using the individual groups of tubes from the point of view of the pressure level, temperature level and the kind of medium they transfer is set in the appropriate guidelines for pressure equipment and the corresponding standards for the individual tubes. The tubes are supplied either as hot rolled or cold drawn. Standards, dimensions and the steel grades are shown in a separate overview.
a separate overview.
Tubes length for pressure equipment
|Diameter (OD) [mm]||Wall (WT) [mm]||Length (L) [mm]|
|OD < 60,3||5 – 6|
|OD => 60,3||WT < 7,1||5 – 6 or 10 – 14|
|WT => 7,1||5 – 6|
Tube straightnessPermitted straightness is set as 0.0015 multiple (0.0015 x L) of the overall tubes length, for a one meter length the permitted straightness is 3 mm.
Tube ends for pressure equipmentThe ends of the tubes are vertical to the longitudinal axis and are without burrs.
Condition of the tubes surfaceCondition of the tubes meets the requirements of the appropriate standards, i.e. the tubes go through normalized forming or after the cold forming goes the normalized annealing. The tube surface meets the standards’ requirements and the means of manufacturing.
Markings of the tubes and tube bundlesThe tubes with the outside diameter up to 51 mm may be marked by a label attached to the tube bundle. Larger tubes must have markings at least at one end of the tube with the necessary data.
Tubes surface protection for pressure equipmentThe means of a temporary protection of the tubes surface for transportation and storage is necessary to agree upon when placing the order. The tubes may be supplied without the temporary preservatives of the surface or with surface protection by a preservative that was agreed upon.
Tube testing for pressure equipmentThe group of TR1 quality is usually tested by a nonspecified test. The group of TR2 quality is always tested by a specified test. The main difference in the mandatory testing between the TR1 and the TR2 is the fact, that in the TR2 quality the testing is done by blow bending test at 0°C temperature and as the optional test at this quality it can be agreed to do the nondestructive test as a proof of longitudinal defects.
Certified test reportsCertified test reports are issued according to the appropriate TDC standards:
EN 10204, pre EN 10294 - 1 certificate 3.1.B, for EN 10297 - 1 Certified test reports : (a) nonspecified testing (only the mandatory tests) 2.2, specified testing – 3.1.B or other types of Certified test reports according to an agreement (3.1.A, 3.1.C, 3.2)
STN 42 0250, ČSN 42 0250
DIN 50049, 2.2 or 3.1.B or other after an agreement